Full Plastic Explosion-Proof Fluorescent Lighting Fittings
Model Number:BAY51-Q
Product Description
BAY51-Q series Full plastic Explosion-proof light fittings for fluorescent lamp (18W*2, 36W*2)
Features:
1, Shell is modeled formed of SMC material. Lamp shade is injected form of polycarbonate with high hardness, impact resistance and strong corrosion resistance properties.
2, Lamp shade is formed of imported high quality material with good transparency and ultraviolet aging resistance functions.
3, Lamp adopts labyrinth sealing type structure with good water-proof, dust-proof functions.
4, Built-in exclusive explosion proof electronic ballast with functions of short circuit and open circuit protection. Defending circuit is designed for tube aging effect and leakage phenomenon to assure lamp normal work. With effective energy-saving effect cosF0.95. Large input range, lamp works well with stable power output in the range of 170V-250V voltage input.
5, Built-in insulation switch, when product opened, the switch cut off power automatically. Fuser can be installed by request.
6, Adopts dual direction pressure tightened type with self-lock function. Built-in spring press lamp tightly as spring lose of sealing washer.
7, For lamp with emergency device, two types can be selected: One type is emergency device built inside lamp body (normal emergency type), the other type is emergency built in special shell outside lamp, connected to lamp end. Built outside emergency device with functions of charge, recharge and matter indicating etc. Test buttons are convenient for overhauling.
BAY51 series Explosion-proof light fittings for fluorescent lamp
Features:
1, Die-cast shell of ZL102 aluminium alloy with high-pressure electrostatic powder-coated surface.
2, Toughened glass lamp tube, stainless steel outer fixed parts, with stainless steel barriers to upgrade lighting effect and reduce glare.
3, Inside are connection chamber and special connection terminals.
4, When mounting, user can pass the cable directly without junction box.
5, When changing tube, only to screw open lamp end then change tube.
6, Suitable for both steel pipe wiring and cable wiring.
7, With many mounting types, also can make according to customers requirement, can degugging mounting.
Full Plastic Explosion-proof Fluorescent Lights with 200 to 240V AC Rated Voltage, High Protection
Model Number:EP0865/0866
Key Specifications/Special Features:
- Power: 2 x 14 and 2 x 28W
- Rated voltage: 200 to 240V AC, 50/60Hz
- Code of lamp holder: G5 (two pins)
- Terminal: 2 x 1.5 to 10mm 2
- Cable entry: plastic molded 1 x M25 x 1.5 cable gland
- Cable outer diameter: Ø8 to 17mm
- Plastic molded: 2 x M25 x 1.5 stopping plug
- Protection degree: IP65
- Standard two-supply circuit design
- EOL switch off function design when the life of the lamp tube is end
- Equipped with mechanical interlocking device and explosion-proof distance switch of II C class to enable the power off automatically when the diffuser is uncovered
- Explosion-proof ballast is certified separately
- With interlocking device
- Can't be energized when the diffuser and enclosure are not closed or sealed completely to ensure the use is security
- Equipped with protective functions of open, short-circuit and abnormity
- Can be used in zone 1 and zone 2
- Can be used in zone 21 and zone 22
Explosion-proof Fluorescent Lights, Available in T5 and T8 Types
Model Number:EP0875/0876
Full plastic
Key Specifications/Special Features:
- Features:
- Code of lamp holder: G5 (two pin for T5 type) and G13 (two pin for T8 type)
- Terminal: 2 x 4mm 2 single-core wire
- Easy to be opened or closed and maintained simply due to the design of the bilateral hinge type lock catch
- High protection degree is up to IP66
- High dust and corrosion proof
- Standard two-supply circuit design
- EOL switch off function design when the life of the lamp tube is end
- Equipped with the mechanical interlocking device and explosion-proof distance switch of II C class to enable the power off automatically when the diffuser is uncovered
- Explosion-proof ballast is certified separately
- Explosion-proof ballast is equipped with the protective functions of open circuit, short circuit and abnormity of lamp tube
- Scope of wide service voltage: 200 to 240V AC
- Diffuser is made from the special material of polycarbonate with the advantages of impact resistance, anti-ultraviolet ray and corrosion-proof
- Cable entry:
- Plastic molded 1 x M25 x 1.5 cable gland
- Outer diameter of cable: Ø8 to 17mm
- Plastic molded 2 x M25 x 1.5 stopping plug
- 2 x 14 and 2 x 28W for T5 energy saving type
- 2 x 18 and 2 x 36W for T8 type
- Protection degree: IP66
- Rated voltage: 200 to 240V AC, 50/60Hz
- Ex-mark, Ex edq, C T4 and DIP A21 TA, T4
- Applicable scope:
- Can be used in zone 2
- Can be used in zone 21 and 22
Flame-proof/Explosion-proof Fluorescent Lamps with Die-cast Aluminum Alloy Enclosure
Model Number:EP-1
Key Specifications/Special Features:
- Features:
- Die-cast aluminum alloy enclosure with surface plastic sprayed light configuration
- When changing lamp tube, should screw down the cover to change it, chain is setted on the shell
- Put one down when maintaining
- Easy to change
- Conduit wiring or cable wiring
- Technical parameters:
- Ex-mark: Exd IIB T6
- Protection grade: IP54
- Cable's outside diameter: 8 to 10mm
- Inlet's thread: 1/2-inch
- Rated power: 20, 30, 40, 60 and 80W
- Rated voltage: 220V
- Applications:
- Can be used in Zone 1 and Zone 2 dangerous place
- Can be used in IIAIIB group explosive atmosphere
- Suitable for light sources (general BI-PIN lamp tube):
- 2 x 40W
- 1 x 40W
- 2 x 30W
- 1 x 30W
- 2 x 20W
- 1 x 20W
- GB3836-2000 and IEC60079 standards
Full Plastic Explosion-proof Fluorescent Lamp with 220V Rated Voltage and IP66 Protection Degree
Model Number:EP0261/2×8W
Key Specifications/Special Features:
- Degree of protection: IP66
- Rated voltage: 220V
- Lamp holder code: Two-pin lamp tube Ø16mm (G5)
- Terminals: 2 x 4mm 2 single core conductor
- Cable entry:
- One molded plastic or one aluminum cable gland
- Two stopping plugs (M25 x 1.5)
- Mounting way: ceiling/wall type
- Intended use:
- Can be used in zone 1 and 2
- Can be used in zone 21 and 22
- Ex mark: Ex ed CT4
8W Full Plastic Emergency Illumination Lamp with 24 Hours Recharging Time, Explosion-proof
Model Number:
EP0262/2×8W
Key Specifications/Special Features:
- Degree of protection: IP66
- Rated voltage: 220V
- Lamp holder code: Two-pin lamp tube Ø16mm (G5)
- Recharging time: 24 hours
- Emergency starting time: 0.3s
- Emergency illuminating time: 90 minutes
- Terminals: 2 x 4mm 2 single core conductor
- Cable entry:
- One molded plastic or one aluminum cable gland
- Two stopping plugs (M25 x 1.5)
- Mounting way: ceiling/wall type
- Intended use:
- Can be used in zone 1 and 2
- Can be used in zone 21 and 22
- Ex mark: Ex ed CT4
Full Plastic Explosion-Proof Fluorescent Light
Model Number:EPBAY51
Product Description
Full plastic explosion-proof fluorescent lamps comprise bodies manufactured in glass fiber reinforced polyester and transparent parts manufactured in polycarbonate. They have good protection ability from various chemical matters in factories because of high stability and mechanical strength. The material this lamp used can prevent from being corroded effectively.
The sealing bars between the bodies and transparent parts are compacted by inter lock devices. The degree of protection can be up to IP66. The isolation switches are operated by the inter lock devices. When the isolation switches are broken, the covers can be opened. Full plastic explosion-proof fluorescent lamps are used for illuminating in the circuits of AC220V, 50Hz.
Features:
1) Full plastic explosion-proof fluorescent lamp:
A) House a electric ballast, an isolation switch, a two-pin lampholder, a reflector and terminals
B) Mounting ways: Ceiling type, pendant type, chain type, bend rod type and clamp type
2) Explosion-proof platform lamp:
A) Comprise lamp poles, change direction connector
B) The new type has the characters of wind proof, waterproof
C) The change direction knots are fitted to the lamp poles so as to mount and maintain conveniently
D) Mounting ways: Fence type, flange type
3) Explosion-proof road lamp:
A) Comprise lamp poles, change direction connectors and frameworks
B) Two codes of lamp poles can be selected
Full plastic explosion-proof fluorescent light, corrosion-proof fluorescent light
Application Scope
1, Hazardous explosive gas mixtures: Zone 1, Zone 2.
2, Explosive gas mixtures IIA, IIB, IIC.
3, Temperature groups:T1~T4.
4, Ex mark: Exed IICT4.
|
Crimping Tool Wire Stripper Hydraulic Tools 
